[Doc] Keep ROCm run examples on the published v0.28.0 image tag

The release pipeline builds and publishes only the CUDA image
(.buildkite/release/release-pipeline.yml builds docker/Dockerfile.cuda;
publish-release-images.sh targets vllm/vllm-omni). The prebuilt ROCm
image is uploaded out-of-band, and v0.28.0 is the latest tag confirmed
live on Docker Hub (#7405). Revert the two docker run examples to
v0.28.0 and state why the tag lags the 0.30.0 wheels, so users do not
hit a missing-tag pull failure. Source-build examples stay on the
upstream vllm/vllm-openai-rocm:v0.30.0 base, which is published.

Signed-off-by: hsliu_ustc <hsliu_ustc@noreply.gitcode.com>

README.md

@@ -16,6 +16,7 @@ Easy, fast, and cheap omni-modality model serving for everyone
 
 *Latest News* 🔥
 
+- [2026/09] We released [0.30.0](https://github.com/vllm-project/vllm-omni/releases/tag/v0.30.0), rebased onto vLLM 0.30.0, featuring a unified full-duplex serving framework around engine-owned sessions for [MiniCPM-o 4.5](recipes/OpenBMB/MiniCPM-o-4_5.md) and AURA, native cross-stage KV and multimodal payload transfer (Mooncake AR-to-DiT handoff and NIXL connectors), interactive world-model serving with [LingBot World](recipes/Robbyant/LingBot-World-2.0.md), and realtime [MiniMax H3](recipes/MiniMaxAI/MiniMax-H3.md) Turbo inference on NVIDIA Blackwell and Ascend 950.
 - [2026/08] We released [0.28.0](https://github.com/vllm-project/vllm-omni/releases/tag/v0.28.0), featuring production-ready [MiniMax H3](recipes/MiniMaxAI/MiniMax-H3.md) serving on GPU and NPU, a unified AR/DiT paged KV cache runtime, and enhanced realtime full-duplex serving for the [MiniCPM-o series](recipes/OpenBMB/MiniCPM-o-4_5.md).
 - [2026/08] [VeRL-Omni](https://github.com/verl-project/verl-omni) `v0.2.0` is released: faster diffusion RL powered by vLLM-Omni (request-level/step-wise batching with FA3), rebuilt Qwen3-Omni multimodal training (DPO & GSPO), plus LTX-2.3, Qwen-Image-Edit support and more. See the [release notes](https://github.com/verl-project/verl-omni/releases/tag/v0.2.0).
 - [2026/08] We released [0.26.0](https://github.com/vllm-project/vllm-omni/releases/tag/v0.26.0) - aligned with the vLLM 0.26 release line, featuring [MiniMax H3](recipes/MiniMaxAI/MiniMax-H3.md) joint video/audio generation, an experimental full-duplex realtime runtime for [MiniCPM-o 4.5](recipes/OpenBMB/MiniCPM-o-4_5.md), distributed layerwise diffusion offload, and broader model, hardware, streaming, TTS, and quantization support.
@@ -58,9 +59,9 @@ vLLM-Omni is flexible and easy to use with:
 vLLM-Omni seamlessly supports most popular open-source models on HuggingFace, including:
 
 - **Omni-modality models** (e.g. Qwen3-Omni, MiniCPM-o 4.5, Cosmos3, HunyuanImage, BAGEL)
-- **TTS models** (e.g. Qwen3-TTS, IndexTTS 2.5, CosyVoice3)
-- **Diffusion models** — image, video, and audio generation (e.g. MiniMax H3, LTX-2.5, SANA-Video, Wan2.2)
-- **Robot-policy and action models** (e.g. π0, GR00T-N1.7, DreamZero-DROID, InternVLA-A1)
+- **TTS models** (e.g. Qwen3-TTS, Tencent AuK, Breeze-TTS-2, CosyVoice3)
+- **Diffusion models** — image, video, and audio generation (e.g. MiniMax H3, LingBot World, MAGI-2, LTX-2.5, Wan2.2)
+- **Robot-policy and action models** (e.g. π0.5, GR00T-N1.7, DreamZero-DROID, InternVLA-A1)
 
 ## Getting Started
 

docs/README.md

@@ -56,9 +56,9 @@ vLLM-Omni is flexible and easy to use with:
 vLLM-Omni seamlessly supports most popular open-source models on HuggingFace, including:
 
 - Omni-modality models (e.g. Qwen3-Omni, MiniCPM-o 4.5, Cosmos3, HunyuanImage, BAGEL)
-- TTS models (e.g. Qwen3-TTS, IndexTTS 2.5, CosyVoice3)
-- Diffusion models — image, video, and audio generation (e.g. MiniMax H3, LTX-2.5, SANA-Video, Wan2.2)
-- Robot-policy and action models (e.g. π0, GR00T-N1.7, DreamZero-DROID, InternVLA-A1)
+- TTS models (e.g. Qwen3-TTS, Tencent AuK, Breeze-TTS-2, CosyVoice3)
+- Diffusion models — image, video, and audio generation (e.g. MiniMax H3, LingBot World, MAGI-2, LTX-2.5, Wan2.2)
+- Robot-policy and action models (e.g. π0.5, GR00T-N1.7, DreamZero-DROID, InternVLA-A1)
 
 For more information, checkout the following:
 

docs/configuration/README.md

@@ -2,7 +2,7 @@
 
 This section lists the most common options for running vLLM-Omni.
 
-For options within a vLLM Engine, please refer to the [vLLM 0.29 configuration guide](https://docs.vllm.ai/en/v0.29.0/configuration/index.html).
+For options within a vLLM Engine, please refer to the [vLLM 0.30 configuration guide](https://docs.vllm.ai/en/v0.30.0/configuration/index.html).
 
 Each model defines fixed topology in a registered `PipelineConfig` and runtime
 overrides in a deploy YAML.

docs/configuration/environment_variables.md

@@ -162,7 +162,7 @@ their keys only.
 ## Inherited vLLM variables
 
 vLLM-Omni also reads variables through its aligned vLLM dependency. Refer to
-the [vLLM 0.29 environment-variable reference](https://docs.vllm.ai/en/v0.29.0/configuration/env_vars.html)
+the [vLLM 0.30 environment-variable reference](https://docs.vllm.ai/en/v0.30.0/configuration/env_vars.html)
 for their definitions. This includes vLLM launch, cache, logging, plugin, ROCm,
 XPU, ModelScope, and FlashInfer workspace settings.
 

docs/getting_started/installation/README.md

@@ -1,7 +1,7 @@
 # Installation
 
 !!! important
-    vLLM-Omni is released against the matching upstream vLLM major/minor version. The 0.30 development line requires vLLM 0.30.x; the source-install instructions pin vLLM 0.30.0. Published vLLM-Omni 0.28.0 wheels and images still require vLLM 0.28.x.
+    vLLM-Omni is released against the matching upstream vLLM major/minor version. The vLLM-Omni 0.30.x release line uses vLLM 0.30.x; the source-install instructions pin vLLM 0.30.0.
 
 vLLM-Omni supports the following hardware platforms:
 

docs/getting_started/installation/gpu.md

@@ -34,9 +34,7 @@ vLLM-Omni is a Python library that supports the following GPU variants. The libr
 
 ### Pre-built wheels
 
-The source-install instructions target vLLM 0.30.0. Until vLLM-Omni 0.30.0 artifacts are published, the CUDA/ROCm pre-built examples below remain on the matching 0.28.0 release pair.
-
-Note: Pre-built wheels are currently available for vLLM-Omni 0.11.0rc1, 0.12.0rc1, 0.14.0rc1, 0.14.0, 0.16.0, 0.18.0, 0.20.0, 0.21.0, 0.22.0, 0.23.0, 0.24.0, 0.25.0, 0.26.0, and 0.28.0. If you need a newer unreleased revision, please [build from source](https://docs.vllm.ai/projects/vllm-omni/en/latest/getting_started/installation/gpu/#build-wheel-from-source).
+Note: Pre-built wheels are currently available for vLLM-Omni 0.11.0rc1, 0.12.0rc1, 0.14.0rc1, 0.14.0, 0.16.0, 0.18.0, 0.20.0, 0.21.0, 0.22.0, 0.23.0, 0.24.0, 0.25.0, 0.26.0, 0.28.0, and 0.30.0. If you need a newer unreleased revision, please [build from source](https://docs.vllm.ai/projects/vllm-omni/en/latest/getting_started/installation/gpu/#build-wheel-from-source).
 
 === "NVIDIA CUDA"
 

docs/getting_started/installation/gpu/cuda.inc.md

@@ -5,7 +5,7 @@
 # --8<-- [end:requirements]
 # --8<-- [start:set-up-using-python]
 
-vLLM-Omni depends on the matching major/minor release of vLLM. The 0.30 development line uses vLLM 0.30.x. Published 0.28.0 wheels and images use vLLM 0.28.x.
+vLLM-Omni depends on the matching major/minor release of vLLM. The vLLM-Omni 0.30.x release line uses vLLM 0.30.x.
 
 !!! note
     PyTorch installed via `conda` will statically link `NCCL` library, which can cause issues when vLLM tries to use `NCCL`. See <gh-issue:8420> for more details.
@@ -18,22 +18,22 @@ Therefore, it is recommended to install vLLM and vLLM-Omni with a **fresh new**
 
 #### Installation of vLLM
 
-These pre-built wheel instructions install the published vLLM-Omni 0.28.0 release. For the 0.30 development line, use the source-install instructions below.
+These pre-built wheel instructions install the published vLLM-Omni 0.30.0 release.
 
 vLLM-Omni is built based on vLLM. Please install it with command below.
 ```bash
-uv pip install vllm==0.28.0 --torch-backend=auto
+uv pip install vllm==0.30.0 --torch-backend=auto
 ```
 
 #### Installation of vLLM-Omni
 
 ```bash
-uv pip install vllm-omni==0.28.0
+uv pip install vllm-omni==0.30.0
 ```
 
 To run Gradio demos, also install the optional extras:
 ```bash
-uv pip install 'vllm-omni[demo]==0.28.0'
+uv pip install 'vllm-omni[demo]==0.30.0'
 ```
 
 # --8<-- [end:pre-built-wheels]
@@ -111,7 +111,7 @@ docker run --runtime nvidia --gpus 2 \
     --env "HF_TOKEN=$HF_TOKEN" \
     -p 8091:8091 \
     --ipc=host \
-    vllm/vllm-omni:v0.28.0 \
+    vllm/vllm-omni:v0.30.0 \
     vllm serve Qwen/Qwen3-Omni-30B-A3B-Instruct --omni --port 8091
 ```
 

docs/getting_started/installation/gpu/rocm.inc.md

@@ -10,9 +10,8 @@
 
 For ROCm, vLLM-Omni currently recommends the setup steps through Docker Images.
 
-vLLM-Omni depends on the matching major/minor release of vLLM. The 0.30
-development line uses vLLM 0.30.x. Published 0.28.0 wheels and images use vLLM
-0.28.x.
+vLLM-Omni depends on the matching major/minor release of vLLM. The vLLM-Omni
+0.30.x release line uses vLLM 0.30.x.
 
 The Dockerfile's `BASE_IMAGE` pin applies only to Docker builds. The
 `vllm-omni` package does not install vLLM as a dependency, so non-Docker source
@@ -23,12 +22,12 @@ installing vLLM-Omni, as shown below.
 
 #### Installation of vLLM
 
-These pre-built wheel instructions install the published vLLM-Omni 0.28.0 release. For the 0.30 development line, use the source-install instructions below.
+These pre-built wheel instructions install the published vLLM-Omni 0.30.0 release.
 
 vLLM-Omni is built based on vLLM. Please install it with command below.
 
 ```bash
-uv pip install vllm==0.28.0+rocm723 --extra-index-url https://wheels.vllm.ai/rocm/0.28.0/rocm723
+uv pip install vllm==0.30.0+rocm723 --extra-index-url https://wheels.vllm.ai/rocm/0.30.0/rocm723
 ```
 
 #### Installation of vLLM-Omni
@@ -37,7 +36,7 @@ uv pip install vllm==0.28.0+rocm723 --extra-index-url https://wheels.vllm.ai/roc
 # we need to add --no-build-isolation as the torch
 # is not obtained from pypi, we have to install using the
 # torch installed in our environment
-uv pip install vllm-omni==0.28.0
+uv pip install vllm-omni==0.30.0
 
 # Optional if want to run Qwen3 TTS
 uv pip uninstall onnxruntime # should be removed before we can install onnxruntime-rocm
@@ -150,6 +149,8 @@ vllm-omni-rocm
 
 vLLM-Omni offers an official docker image for deployment. These images are built on top of vLLM docker images and available on Docker Hub as [vllm/vllm-omni-rocm](https://hub.docker.com/r/vllm/vllm-omni-rocm/tags). The version of vLLM-Omni indicates which release of vLLM it is based on.
 
+The prebuilt ROCm image is published separately from the release pipeline: `v0.28.0` is the latest tag currently available on Docker Hub, and newer-tag availability is tracked in [#7405](https://github.com/vllm-project/vllm-omni/issues/7405).
+
 #### Launch vLLM-Omni Server
 
 Here's an example deployment command that has been verified on 2 x MI300's:

docs/getting_started/installation/npu/npu.inc.md

@@ -53,7 +53,7 @@ docker run --rm \
 
 # Inside the container, install vLLM-Omni from source
 cd /vllm-workspace
-git clone -b v0.30.0rc1 https://github.com/vllm-project/vllm-omni.git
+git clone -b v0.30.0 https://github.com/vllm-project/vllm-omni.git
 cd vllm-omni
 pip install -v -e . --no-build-isolation
 # or VLLM_OMNI_TARGET_DEVICE=npu pip install -v -e .